A Biaxial Load Cell Design for Simultaneous Measurement of Horizontal and Vertical Spring Forces in Sinuous Spring-Supported Seating
Tackett B, Zhang J
Page Count: 10
Published Online: 09 May 2007
Abstract
Download PDF
Paper ID: JTE100112
DOI: 10.1520/JTE100112

A New Methodology for Whole-Package Microbial Challenge Testing for Medical Device Trays
Severin J, Bix L, Linz J, Gilliland D, Lockhart H
Page Count: 8
Published Online: 23 May 2007
Abstract
Download PDF
Paper ID: JTE100869
DOI: 10.1520/JTE100869

Pavement Deformation Characteristics under Repeated Aircraft Loading with Fixed Wander Sequence
Gopalakrishnan K, Gomez-Ramirez F, Thompson MR
Page Count: 9
Published Online: 15 November 2006
Abstract
Download PDF
Paper ID: JTE100580
DOI: 10.1520/JTE100580

A New Biaxial Tension Test Fixture for Uniaxial Testing Machine—A Validation for Hyperelastic Behavior of Rubber-like Materials
Brieu M, Diani J, Bhatnagar N
Page Count: 9
Published Online: 06 December 2006
Abstract
Download PDF
Paper ID: JTE100688
DOI: 10.1520/JTE100688

Laser Welding Conditions to Improve Tensile Strength and Fatigue Strength of a Lap Joint in Aluminum Alloys
Kawamoto K, Yoshimitsu S, Noguchi H, Yoshimura T
Page Count: 8
Published Online: 10 January 2007
Abstract
Download PDF
Paper ID: JTE100077
DOI: 10.1520/JTE100077

An Experimentally-Based Analytical Model of the Stress Field in an Iosipescu Composite Test Specimen
Bell JM, Odom EM
Page Count: 6
Published Online: 03 January 2007
Abstract
Download PDF
Paper ID: JTE100543
DOI: 10.1520/JTE100543

A Journal Bearing Test Rig With Reduced Uncertainty: Some Design Considerations
Wale D, Mba D
Page Count: 8
Published Online: 21 February 2007
Abstract
Download PDF
Paper ID: JTE100116
DOI: 10.1520/JTE100116

Characterization of Thermal Degradation of Liquid Amine Anti-Strip Additives in Asphalt Binders Due to RTFO and PAV-Aging
Wasiuddin NM, Fogle CM, Zaman MM, O’Rear EA
Page Count: 8
Published Online: 21 February 2007
Abstract
Download PDF
Paper ID: JTE100660
DOI: 10.1520/JTE100660

Tensile Creep Studies on Filled Polychloroprene Elastomer
Lacroix F, Tougui A, Berton G, Ranganathan N, Neelakantan NR
Page Count: 6
Published Online: 14 March 2007
Abstract
Download PDF
Paper ID: JTE100081
DOI: 10.1520/JTE100081

Development of a Viscosity Specification for Hot-Poured Bituminous Sealants
Al-Qadi IL, Fini EH, Elseifi MA, Masson J, McGhee KM
Page Count: 9
Published Online: 14 March 2007
Abstract
Download PDF
Paper ID: JTE100260
DOI: 10.1520/JTE100260

A Method for Evaluating Fretting Wear Scars in Thin Steel Roping Wires Based on Confocal Imaging Profilometry
Urchegui MA, Tato W, Gómez X
Page Count: 7
Published Online: 18 April 2007
Abstract
Download PDF
Paper ID: JTE100631
DOI: 10.1520/JTE100631

Fault Classification of Water Hydraulic System by Vibration Analysis with Support Vector Machine
Chen HX, Chua PS, Lim GH
Page Count: 8
Published Online: 18 April 2007
Abstract
Download PDF
Paper ID: JTE100734
DOI: 10.1520/JTE100734

Experimental Technique for Fully-Reversed Low-Cycle Fatigue Testing of Thin Metallic Foils
Yang D, Holmes JW
Page Count: 4
Published Online: 25 April 2007
Abstract
Download PDF
Paper ID: JTE100524
DOI: 10.1520/JTE100524

Small Specimen Test Techniques for Estimating the Tensile Property Degradation of Mod 9Cr-1Mo Steel on Thermal Aging
Karthik V, Laha K, Parameswaran P, Kasiviswanathan KV, Raj B
Page Count: 11
Published Online: 25 April 2007
Abstract
Download PDF
Paper ID: JTE100713
DOI: 10.1520/JTE100713

Measurement, Analysis, and Comparison of the Parcel Shipping Shock and Drop Environment of the United States Postal Service with Commercial Carriers
Singh J, Singh SP, Burgess G, Saha K
Page Count: 5
Published Online: 25 April 2007
Abstract
Download PDF
Paper ID: JTE100787
DOI: 10.1520/JTE100787