New Method for Testing Fiber-reinforced Polymer Rods Under Flexure
Zhang B, Masmoudi R, Benmokrane B
Page Count: 6
Published Online: 26 July 2006
Abstract
Download PDF
Paper ID: JTE100329
DOI: 10.1520/JTE100329

Using Nondestructive Testing Technologies to Assist in Selecting the Optimal Pavement Rehabilitation Strategy
Chen DH, Scullion T
Page Count: 9
Published Online: 09 August 2006
Abstract
Download PDF
Paper ID: JTE100136
DOI: 10.1520/JTE100136

Deicer Salt Scaling Resistance of Concrete Containing Manufactured Sands
Dilek U, Leming ML
Page Count: 9
Published Online: 23 August 2006
Abstract
Download PDF
Paper ID: JTE100475
DOI: 10.1520/JTE100475

Effect of Magnetic Field on Fatigue Crack Propagation of Single-Edge Cracked Soft Ferromagnetic Specimens under Mode I Loading
Shindo Y, Shindo I, Narita F
Page Count: 6
Published Online: 23 August 2006
Abstract
Download PDF
Paper ID: JTE100622
DOI: 10.1520/JTE100622

Statistical Correlations Between Seismic Wave Velocities and SPT Blow Counts and the Relative Density of Soils
Ulugergerli EU, Uyanik O
Page Count: 5
Published Online: 30 August 2006
Abstract
Download PDF
Paper ID: JTE100159
DOI: 10.1520/JTE100159

Accelerated Diffusion Test on the Intact Rock Mass
Rao BH, Dalinaidu A, Singh DN
Page Count: 7
Published Online: 30 August 2006
Abstract
Download PDF
Paper ID: JTE100184
DOI: 10.1520/JTE100184

Stress Intensity Formulas for Three-dimensional Cracks in the Vicinity of an Interface
Noda N, Liang B
Page Count: 11
Published Online: 30 August 2006
Abstract
Download PDF
Paper ID: JTE100588
DOI: 10.1520/JTE100588

Towards the Development of Accelerated Methods for Assessing the Durability of Wood Plastic Composites
Silva A, Gartner BL, Morrell JJ
Page Count: 9
Published Online: 13 September 2006
Abstract
Download PDF
Paper ID: JTE100168
DOI: 10.1520/JTE100168

Dynamic Modulus of Asphalt Mixtures for Development of Korean Pavement Design Guide
Lee K, Kim H, Kim N, Kim Y
Page Count: 9
Published Online: 20 September 2006
Abstract
Download PDF
Paper ID: JTE100045
DOI: 10.1520/JTE100045

Comparison of Different Methods for Fatigue Limit Evaluation by Means of the Monte Carlo Method
Minak G
Page Count: 8
Published Online: 12 July 2006
Abstract
Download PDF
Paper ID: JTE100122
DOI: 10.1520/JTE100122

Ambiguities in Technical Standards—Case Study IEC 60112—Measuring the Resistance of Solid Isolating Materials to Tracking
Beges G, Stare E, Drnovsek J
Page Count: 8
Published Online: 19 July 2006
Abstract
Download PDF
Paper ID: JTE100028
DOI: 10.1520/JTE100028

Quantification of Coarse Aggregate Surface Texture Using Image Analysis
Pan T, Tutumluer E
Page Count: 10
Published Online: 19 July 2006
Abstract
Download PDF
Paper ID: JTE100181
DOI: 10.1520/JTE100181

Missionary Ridge Fire Cost Assessment
Mackes KH, Lynch DL, Kelly SK, Eckhoff M
Page Count: 4
Published Online: 28 March 2007
Abstract
Download PDF
Paper ID: JTE100044
DOI: 10.1520/JTE100044

Measuring Stress Strain Curves to Large Strains on Sheet Metal
Bacha A, Feuerstein M, Desrayaud C, Klöcker H
Page Count: 10
Published Online: 18 October 2006
Abstract
Download PDF
Paper ID: JTE100082
DOI: 10.1520/JTE100082