Testing of Salt-Contaminated Materials: Use of Aqueous Solutions for Control of Relative Humidity
ASTM International

Books & Journals/Journal of Testing and Evaluation/Citation Page/

Volume 35, Issue 5 (September 2007)

ISSN: 0090-3973
Published Online: 23 May 2007
Page Count: 4

Click here to download this paper now

View License Agreement

Testing of Salt-Contaminated Materials: Use of Aqueous Solutions for Control of Relative Humidity
Gonçalves TD, Abreu MM
(Received 28 December 2005; accepted 3 February 2007)

Abstract

Today, many kinds of laboratory tests are performed on salt-contaminated materials. In these tests the relative humidity is often controlled inside closed containers by means of selected salt solutions or pure water. This paper discusses the influence of the contaminant salts on the environmental conditions inside such containers. Two experiments were performed by monitoring the relative humidity and temperature when NaCl samples were kept over pure water. The results showed that the NaCl samples significantly disturbed the environmental conditions inside the containers. This indicates that methods of generating constant relative humidity by means of salt solutions or pure water can be inappropriate in the case of salt-contaminated materials. As a precautionary measure, monitoring of the environmental parameters inside the containers should be carried out.



Keywords:
relative humidity, control of relative humidity, aqueous solutions, salt solutions, soluble salts, salt decay

Paper ID: JTE100192
DOI: 10.1520/JTE100192

ASTM International is a member of CrossRef.
Author Gonçalves TD, Abreu MM Title Testing of Salt-Contaminated Materials: Use of Aqueous Solutions for Control of Relative Humidity Symposium , Committee on

 
Copyright © 1996-2006 ASTM. All Rights Reserved.
ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA