On the Thick-Adherend Tensile Shear Test of Adhesive Technology—Limitations and Correction Me
Öchsner, A
Assistant Professor, Department of Mechanical Engineering and Centre for Mechanical Automation and Technology, University of Aveiro, Campus Universitário de Santiago, Aveiro, Portugal, 3810-193

Grácio, J
Professor, Department of Mechanical Engineering and Centre for Mechanical Technology and Automation, University of Aveiro, Campus Universitário de Santiago, Aveiro, Portugal, 3810-193

(Received 27 April 2004; accepted 3 August 2005)

Abstract
The thick-adherend lap shear test is numerically investigated. It is shown that the adhesive stiffness influences significantly the uniformity of the adhesive stress distribution and the substrate deformation. Both effects determine the validity of the evaluated shear modulus of the adhesive. Two methods for the substrate deformation correction, i.e., a simple method based on Hooke’s law, and a method based on a finite element simulation of a reference specimen, are compared. The correction method based on the finite element method reveals not only better results for the substrate deformation correction in comparison with the simple method based on Hooke’s law, but also incorporates the non-uniformity of the adhesive stress distribution for higher stiffness of the adhesive in a considerable way. The possible error of this test method on the determination of the adhesive shear modulus is generally quoted as a function of the stiffness ratio between the adhesive and the substrates.

Keywords:
adhesive technology, finite element stress analysis, tensile-shear test, substrate deformation correction, mechanical properties of adhesives, adhesive shear properties, shear stress-strain curves

Paper ID: JTE12640
DOI: 10.1520/JTE12640

ASTM International is a member of CrossRef.
Author Öchsner A, Grácio J Title On the Thick-Adherend Tensile Shear Test of Adhesive Technology—Limitations and Correction Me Symposium , Committee on