Development of a Single-Edge Notched Beam Test for Asphalt Concrete Mixtures
ASTM International

Books & Journals/Journal of Testing and Evaluation/Citation Page/

Volume 33, Issue 6 (November 2005)

ISSN: 0090-3973
Published Online: 7 September 2005
Page Count: 9

Click here to download this paper now

View License Agreement

Development of a Single-Edge Notched Beam Test for Asphalt Concrete Mixtures
Wagoner, MP
Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, IL.

Buttlar, WG
Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, IL.

Paulino, GH
Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, IL.

(Received 9 February 2004; accepted 31 May 2005)

Abstract
This paper describes the development of a fracture test for determining the fracture energy of asphalt concrete. The test will be used in combination with numerical analysis and field studies to obtain a better understanding of the mechanisms of reflective cracking in asphalt concrete overlays. A review of the literature revealed that a single-edge notched beam (SE(B)) test specimen was the most promising fracture test for the objectives of the reflective cracking study. Existing servohydraulic testing equipment was modified to perform the SE(B) test along with new loading fixtures, sensors, data collection, and analysis procedures. Preliminary tests were conducted to develop test procedures, to obtain a better understanding of crack-front characteristics, to investigate test repeatability, to examine variations of fracture energy with temperature, and to investigate mixed-mode fracture. The results from the tests follow expected trends and test variability appears to be within a range typical for asphalt concrete fracture testing.

Keywords:
asphalt concrete, asphalt concrete mixtures, cohesive zone model, fracture, mixed-mode fracture, notched beam test, single-edged notched beam

Paper ID: JTE12579
DOI: 10.1520/JTE12579

ASTM International is a member of CrossRef.
Author Wagoner, MP Affiliation Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, IL. Author Buttlar, WG Affiliation Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, IL. Author Paulino, GH Affiliation Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, IL. Author Wagoner MP, Buttlar WG, Paulino GH Title Development of a Single-Edge Notched Beam Test for Asphalt Concrete Mixtures Symposium , Committee on

 
Copyright © 1996-2006 ASTM. All Rights Reserved.
ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA