Application of the Bubble Point Method to the Characterization of the Pore-Size Distribution of Geotextiles
ASTM International

Books & Journals/Geotechnical Testing Journal/Citation Page/

Volume 18, Issue 1 (March 1995)

ISSN: 0149-6115
Published Online: 0 0
Page Count: 12

PDF not available for download

View License Agreement

Application of the Bubble Point Method to the Characterization of the Pore-Size Distribution of Geotextiles
Bathia SK, Smith JL
(Received 0 0; accepted 0 0)

Abstract
For the design of a geotextile as a filter, reliable information about the pore-size distribution of the geotextile is needed. The bubble point method is one technique that is able to provide this information for a geotextile. The bubble point method is a simple and rapid technique for evaluating pore-size distributions of virgin, clogged, and stretched geotextiles. In addition, the bubble point equipment is also capable of providing information as to the degree of clogging within a geotextile and the permeability of a geotextile. The geotextile pore-size distribution results obtained by the bubble point method showed good repeatability. However, the bubble point method was only able to distinguish between geotextiles that had significantly different cross sections. Pore-size distribution results for geotextiles with similar cross sections, but of increasing thickness, were very similar. The dry sieving (ASTM D 4751), hydrodynamic sieving (CAN/CGSB-148.1–10), and wet sieving (SW-640550-83) methods are generally only useful for evaluating the larger pore openings (O95, O90) of the geotextiles.2 In addition, the methods are time consuming. The mercury intrusion porosimetry method (ASTM D 4404) was also performed; however, there was little difference in pore-size distribution results for any of the 28 different geotextiles tested (Smith 1993). There are also environmental concerns with using mercury. The bubble point method showed potential for characterizing the pore-size distribution of geotextiles.

Keywords:
bubble point method, dry sieving, filter criteria, geotextiles, hydrodynamic sieving, mercury intrusion porosimetry, opening size, pore-size distribution, wet sieving

ASTM International is a member of CrossRef.
Author Bathia SK, Smith JL Title Application of the Bubble Point Method to the Characterization of the Pore-Size Distribution of Geotextiles Symposium , Committee on

 
Copyright © 1996-2007 ASTM. All Rights Reserved.
ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA