Development and Calibration of a TDR Extensometer for Geotechnical Monitoring
ASTM International

Books & Journals/Geotechnical Testing Journal/Citation Page/

Volume 28, Issue 5 (September 2005)

ISSN: 0149-6115
Published Online: 13 July 2005
Page Count: 8

Click here to download this paper now

View License Agreement

Development and Calibration of a TDR Extensometer for Geotechnical Monitoring
Lin, CP
National Chiao Tung University, Hsinchu, Taiwan

Tang, SH
National Chiao Tung University, Hsinchu, Taiwan

(Received 11 August 2003; accepted 14 March 2005)

Abstract
Up-hole reflectometry devices that interrogate passive mechanical transducers are increasingly used in geotechnical instrumentation. One of such a monitoring technique is the time domain reflectometry (TDR). This study utilizes the principle of TDR to devise a TDR extensometer using a waveguide with an impedance mismatch interface inside it. The movement of the impedance mismatch interface is coupled with the displacement of interest such that the time shift in the reflected signal becomes a measure of the displacement. The accuracy of the TDR extensometer is better than ±0.5 mm and is not affected by measuring range and cable length. It can be used for applications that require both high accuracy and large displacement range, and is suitable for long-term monitoring in a harsh environment where humidity and lightening surge may cause problems for electronic sensors. The devised extensometer can be combined with existing TDR transducers for groundwater pressure and shear deformation to form an integrated TDR monitoring system for slope stability.

Keywords:
extensometer, slope monitoring, time domain reflectometry, water, waveguide

Paper ID: GTJ12188
DOI: 10.1520/GTJ12188

ASTM International is a member of CrossRef.
Author Lin, CP Affiliation National Chiao Tung University, Hsinchu, Taiwan Author Tang, SH Affiliation National Chiao Tung University, Hsinchu, Taiwan Author Lin CP, Tang SH Title Development and Calibration of a TDR Extensometer for Geotechnical Monitoring Symposium , Committee on

 
Copyright © 1996-2007 ASTM. All Rights Reserved.
ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA