Development of a New Hollow Cylinder Apparatus for Stress Path Measurements over a Wide Strain Range
O'Kelly, BC
Department of Civil, Structural, and Environmental Engineering, University of Dublin, Trinity College, Ireland

Naughton, PJ
School of Engineering, Institute of Technology, Sligo, Ireland

(Received 29 September 2003; accepted 28 December 2004)

Abstract
The development and operation of a new, automated hollow cylinder apparatus that facilitates accurate stress path measurements from the pseudo elastic domain to failure strain levels are described. Innovative sample loading mechanisms of 19.3 kN axial and 103 N·m torsional capacities facilitate rapid, precise (of the order of 10^-5% strain) displacement and rotation of the sample loading piston, with negligible compliance in the mechanisms on reversing the direction of piston motion. Both internal and external instrumentation are used to record the deformational response of the test specimen to better than 10^-2% strain. Significant differences were found between the strain values measured using the internal and external instrumentation, with the external instrumentation underestimating the true stiffness of the specimen. A series of drained stress-path tests on Leighton Buzzard sand specimens showed that predefined stress paths can be followed to an accuracy of 0.5 kPa using the new apparatus.

Keywords:
automation, generalized stress path, hollow cylinder apparatus, small strain, soil

Paper ID: GTJ12252
DOI: 10.1520/GTJ12252

ASTM International is a member of CrossRef.
Author O'Kelly, BC Affiliation Department of Civil, Structural, and Environmental Engineering, University of Dublin, Trinity College, Ireland Author Naughton, PJ Affiliation School of Engineering, Institute of Technology, Sligo, Ireland Author O'Kelly BC, Naughton PJ Title Development of a New Hollow Cylinder Apparatus for Stress Path Measurements over a Wide Strain Range Symposium , Committee on