A Modified Pressure Plate Apparatus
Leong, EC
School of Civil & Environmental Engineering, Nanyang Technological University, Singapore.

Tripathy, S
School of Civil and Environmental Engineering, Nanyang Technological University, Singapore

Rahardjo, H
School of Civil & Environmental Engineering, Nanyang Technological University, Singapore.

(Received 10 December 2001; accepted 25 August 2003)

Abstract
Soil-water characteristic curves of soils can be measured in the laboratory using conventional testing apparatus such as the pressure plate. This paper describes a modified pressure plate apparatus using a commercially available high air entry ceramic plate. The modified pressure plate apparatus has several advantages over the conventional pressure plate apparatus: It can be used to determine both the drying and wetting soil-water characteristic curves, whereas the conventional pressure plate can usually determine only the drying soil-water characteristic curve; the water reservoir beneath the ceramic plate ensures that the ceramic plate is fully saturated at all times; air appearing in the water reservoir due to air diffusion through the ceramic disk can be flushed out by the cross-flow system during the test without stoppage of the test.

Keywords:
drying and wetting, modified pressure plate, soil, soil-water characteristic curve, unsaturated soil, unsaturated soils

Paper ID: GTJ11053
DOI: 10.1520/GTJ11053

ASTM International is a member of CrossRef.
Author Leong, EC Affiliation School of Civil & Environmental Engineering, Nanyang Technological University, Singapore. Author Tripathy, S Affiliation School of Civil and Environmental Engineering, Nanyang Technological University, Singapore Author Rahardjo, H Affiliation School of Civil & Environmental Engineering, Nanyang Technological University, Singapore. Author Leong EC, Tripathy S, Rahardjo H Title A Modified Pressure Plate Apparatus Symposium , Committee on