Method for Determining the Coefficient of Permeability of Clays
ASTM International

Books & Journals/Geotechnical Testing Journal/Citation Page/

Volume 26, Issue 1 (March 2003)

ISSN: 0149-6115
Published Online: 0 0
Page Count: 10

Click here to download this paper now

View License Agreement

Method for Determining the Coefficient of Permeability of Clays
Moriwaki T, Umehara K
(Received 14 August 2001; accepted 18 March 2002)

Abstract
A new method for directly determining the coefficient of permeability of clays from the constant rate of strain consolidation tests was proposed by Yoshikuni et al. (1995). In order to confirm the reliability of this method, the constant rate of strain consolidation tests under three kinds of strain rates were carried out on four kinds of clays in this study. The permeability tests using a flow pump and the conventional consolidation tests were also carried out on the same clays for comparing the coefficient of permeability obtained from each test. As the results, it was found that the coefficient of permeability obtained by the proposed method from the constant rate of strain consolidation tests agreed with the coefficient of permeability obtained from the permeability tests.

Keywords:
clays, coefficient of permeability, compressibility of clay, constant rate of strain consolidation test, conventional consolidation test, permeability test, saturated clay

Paper ID: GTJ200310715_261

ASTM International is a member of CrossRef.
Author Moriwaki T, Umehara K Title Method for Determining the Coefficient of Permeability of Clays Symposium , Committee on

 
Copyright © 1996-2007 ASTM. All Rights Reserved.
ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA