Dynamic Properties of Granulated Rubber/Sand Mixtures
Feng ZY, Sutter KG
(Received 30 June 1998; accepted 12 January 2000)

Abstract
Processed waste tires mixed with soils are applicable in lightweight fills for slopes, retaining walls, and embankments that may be subjected to seismic loads. Rubber's high damping capacity permits consideration of granulated rubber/soil mixtures as part of a damping system to reduce vibration. The dynamic properties of granulated rubber/soil mixtures are essential for the design of such systems. This research investigates the shear modulus and damping ratio of granulated rubber/sand mixtures using a torsional resonant column. Specimens were constructed using different percentages of granulated tire rubber and Ottawa sand at several different percentages. The maximum shear modulus and minimum damping ratio are presented with the percentage of granulated rubber. It is shown that reference strain can be used to normalize the shear modulus into a less scattered band for granulated rubber/sand mixtures. The normalized shear modulus reduction for 50% granulated rubber (by volume) is close to a typical saturated cohesive soil. Empirical estimation of maximum shear modulus of soil/rubber mixtures can be achieved by treating the volume of rubber as voids.

Keywords:
damping ratio, dynamic property, mixture, Ottawa sand, reference strain, resonant column test, rubber, shear modulus, soils, tire chip, waste tire

Paper ID: GTJ2330338

ASTM International is a member of CrossRef.
Author Feng ZY, Sutter KG Title Dynamic Properties of Granulated Rubber/Sand Mixtures Symposium , Committee on