Modified Ring Shear Apparatus for Unsaturated Soils Testing
ASTM International

Books & Journals/Geotechnical Testing Journal/Citation Page/

Volume 30, Issue 1 (January 2007)

ISSN: 0149-6115
Published Online: 20 September 2006
Page Count: 9

Click here to download this paper now

View License Agreement

Modified Ring Shear Apparatus for Unsaturated Soils Testing
Infante Sedano, J&
Ph.D., University of Ottawa, Ottawa, Canada

Vanapalli, SK
Assistant Professor, University of Ottawa, Ottawa, Canada

Garga, VK
Professor, University of Ottawa, Ottawa, Canada

(Received 4 October 2005; accepted 25 April 2006)

Abstract

This paper presents the design details of an automated modified ring shear apparatus for the testing of unsaturated soils using the axis-translation technique. The components of this automated system are described, as well as the types of tests that it can be used for. The key cell components include a flushing system and a precise volume gage system. The paper presents typical test results including the continuous monitoring of water as the test proceeds. A methodology to correct the water content measurements for the effect of air infiltration and evaporation or condensation of water is included.



Keywords:
modified ring shear, unsaturated soils, shear strength, residual strength, axis translation

Paper ID: GTJ100002
DOI: 10.1520/GTJ100002

ASTM International is a member of CrossRef.
Author Infante Sedano J&, Vanapalli SK, Garga VK Title Modified Ring Shear Apparatus for Unsaturated Soils Testing Symposium , Committee on

 
Copyright © 1996-2007 ASTM. All Rights Reserved.
ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA