Pile Skin Friction in Sands from Constant Normal Stiffness Tests
ASTM International

Books & Journals/Geotechnical Testing Journal/Citation Page/

Volume 18, Issue 3 (September 1995)

ISSN: 0149-6115
Published Online: 0 0
Page Count: 15

PDF not available for download

View License Agreement

Pile Skin Friction in Sands from Constant Normal Stiffness Tests
Tabucanon JT, Airey DW, Poulos HG
(Received 0 0; accepted 0 0)

Abstract
Many interface and sand-to-sand direct shear tests have been performed with a constant normal stiffness to investigate the effects of interface roughness, normal stiffness, soil relative density, initial normal stress, and cyclic displacement amplitude on the soil-interface response. It is demonstrated that the patterns of behavior in these tests are similar to those observed in model pile tests and that the constant normal stiffness (CNS) condition is required to account for the effects of the volume changes that occur as soil adjacent to a pile is sheared. In dense sands that tend to expand in volume when sheared, the shear and normal stresses developed are significantly higher than for constant normal load (CNL) conditions and increase with higher values of normal stiffness. For loose sands that compress when sheared, the stresses are lower than in CNL tests and decrease for higher values of normal stiffness. The CNS tests replicate the reduction in shear stress during displacement-controlled cycling and the subsequent loss of capacity reported for model and full-scale piles. The reduction of skin friction during cycling and the subsequent loss of pile frictional capacity is found to be greatest for loose sands, high normal stiffness, large displacement amplitudes, and rough interfaces.

Keywords:
constant normal stiffness, cyclic tests, piles, sand, shear box, skin friction

ASTM International is a member of CrossRef.
Author Tabucanon JT, Airey DW, Poulos HG Title Pile Skin Friction in Sands from Constant Normal Stiffness Tests Symposium , Committee on

 
Copyright © 1996-2007 ASTM. All Rights Reserved.
ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA